ASSEMBLY INSTRUCTIONS
1.
Attach the 2 casters to the underside of the base
(on the rounded end
A
) using 8 button head
screws
B
, as shown in
C
.
2.
Attach the wheels to each side of the base as
shown in
D
, in the assembly order shown in
E
.
9
START
START
Wherever possible avoid running hoses and ducting
along the floor.
Keep hoses and ducting safely mounted along the
walls.
HOSES AND DUCTING RUNNING ALONG THE SHOP FLOOR BETWEEN MACHINERY CAN CAUSE USERS TO TRIP AND LEAD
TO SERIOUS INJURY.
LAYING OUT A PLAN FOR THE PIPING
For permanent installations, it is advisable to map out a rough layout of your planned installation starting from the
dust collector out to all the machines that you wish to connect to the system. You may vary your layout to suit your
specific shop needs and may choose to use metal or plastic ducting, or flexible hose in any combination as
suited to your needs.
Note: To avoid accidents as well as damage to ducting or hoses, plan your installation with hoses and ducting
running along walls or mounted from above wherever possible. See the accompanying examples of non-recom-
mended and recommended installations.
• SERIOUS PERSONAL INJURY COULD OCCUR IF YOU CONNECT THE MACHINE TO THE POWER SOURCE BEFORE YOU
HAVE COMPLETED THE SETUP PROCESS. DO NOT HOOK-UP THE MACHINE TO A POWER SOURCE UNTIL INSTRUCTED
TO DO SO.
• BE SURE TO READ AND UNDERSTAND THIS ENTIRE MANUAL.
• USE CAUTION AND WEAR GLOVES WHEN HANDLING METAL PARTS SUCH AS THE BELT CLAMPS, WHICH CAN CUT IF
HANDLED CARELESSLY.
• THE SOUND LEVEL OF THIS MACHINE IS RATED AT APPROXIMATELY 80-85 DB DURING OPERATION. MAKE SURE THAT
ADEQUATE HEARING PROTECTION IS USED AND THAT THE OVERALL SOUND LEVEL WITHIN THE WORKING ENVIRON-
MENT IS TAKEN INTO CONSIDERATION.
E
1- Long hex head bolt
2- Flat washer (small)
3- Flat washer (large)
4- Plastic spacer
5- Hex nut
6- Lock nut
D
B
A
C
