background image

ROHS 

This product is in compliance with Directive 2011/65/EU of the European 

Parliament and of the Council of 8 June 2011, on the restriction of the use of certain 

hazardous substances in electrical equipment. 

FCC Caution. 

This device complies with part 15 of the FCC Rules. Operation is subject to the 

following two conditions: (1) This device may not cause harmful interference, and 

(2) this device must accept any interference received, including interference that

may cause undesired operation. 

Any Changes or modifications not expressly approved by the party responsible for 

compliance could void the user's authority to operate the equipment. 

Note

: This equipment has been tested and found to comply with the limits for a 

Class B digital device, pursuant to part 15 of the FCC Rules. These limits are 

designed to provide reasonable protection against harmful interference in a 

residential installation. This equipment generates uses and can radiate radio 

frequency energy and, if not installed and used in accordance with the instructions, 

may cause harmful interference to radio communications. However, there is no 

guarantee that interference will not occur in a particular installation. If this 

equipment does cause harmful interference to radio or television reception, which 

can be determined by turning the equipment off and on, the user is encouraged to 

try to correct the interference by one or more of the following measures: -Reorient 

or relocate the receiving antenna. -Increase the separation between the equipment 

and receiver. -Connect the equipment into an outlet on a circuit different from that 

to which the receiver is connected. -Consult the dealer or an experienced radio/TV 

technician for help. 

The device has been evaluated to meet general RF exposure requirement. The 

device can be used in portable exposure condition without restriction. 

Содержание 2ABFESPRM20















Отзывы: