GENERAL PUMP
A member of the Interpump Group
ASSEMBLY INSTRUCTIONS
1. Slide washer (Item 10) over
the shaft of the upper arm assembly.
2. Insert the shaft onto the lower arm.
3. Assemble the remaining components
with the layout shown. Use a thread
sealant (not provided) designed for
locking and sealing of metal pipes
(e.g. LOCTITE 263, 542, 545 & 577)
on the inlet threads of the swivel.
4. Attach inlet hose to the swivel on
the lower arm assembly.
5. Attach the outlet hose to the swivel
on the upper arm assembly then
secure to hose clamp (Item 15).
6. Route the opposite end of the hose
through the openings in the flange
and hose guide.
7. The hose reel is ready for
operation.
DIMENSIONS (DHRTM50100)
DHRTM50100/DHRTM50200
Trailer Mounted Hose Reel
Ref 301026 Rev F
08-21
[IN] / MM
