General Pipe Cleaners Speedrooter XL, Руководство по эксплуатации

Страница: 5 / 12

Speedrooter XL
®
Cable Application Chart (Table 1)
Cable Size Pipe Size Typical Applications
3/4”
(Large Drum)
4” to 10” Large Drains, Long Runs, Roots
5/8”
(Large Drum)
3” to 6” Floor Drains, Roots
1/2”
(Small Drum)
2” to 4”
Stacks & Small Drains
(No Roots)
5
Cutter Application Chart (Table 2)
Cutter Cat. # Typical Applications
Cutters for 1/2” Cables
Arrow
Head
AH
Starting Tool, ideal for cutting
and scraping.
1- 1/2”
U-Cutter
1-1/2UC Finishing tool, works well in
grease stoppages.
Small
Retrieving
Tool
RTR-1
To remove or retrieve loose
objects.
13” Flexible Leader LE-1
Tool for negotiating around
difficult bends.
Cutters for 5/8” and 3/4” Cables
Spear
Head
SHD
Starting Drill — gets water flow-
ing.
2”
U-Cutter
2UC For Cutting and Scraping
3” & 4”
Side
Cutter
Blades
3SCB
&
4SCB
For Cutting — Scraping walls of
pipe.
3” Heavy
Duty Saw
Blade 3HDB For Cutting Roots
4” Rotary
Saw Blade
4RSB For Cutting Roots
Large
Retrieving
Tool
RTR-2
For removing loose objects or
broken cables.
26” Flexible Leader LE-3
Helps cable get through tight
traps and bends.
Note: There are no fixed rules for what cutter to use. If one tool
doesn’t take care of a stoppage, simply try another.
FEATURES
Adjustable Height Handle
Motor
Switch
V - Belt
Truck
Loading
Wheel
Drum
Foot Pedal
Distributor Tube
Belt Guard
Feed Pressure
Control Knob
Feed
Control
Lever
Cutter
Stair
Climbers
Wheel
Brake
Speedrooter XL shown (Right)
with Cable Guide Tube
(Cat. # SXL - GT)
THE SECTION OF CORD BETWEEN THE WALL PLUG
AND THE GFCI IS NOT IN THE PROTECTED CIRCUIT.
Ground Fault Circuit Interrupter (GFCI)
Your machine is equipped with a ground fault circuit interrupter, which
protects you against shock if a short circuit should occur. Check that
receptacle is properly grounded. Test the GFCI before each use.
1. Plug into 120-volt receptacle.
2. Push test button. Indicator light will go out and power to machine
should cut off.
3. If light does not go out when test button is pushed, DO NOT USE
THE MACHINE until proper repairs can be made.
4. To restore power after test, push reset button. With the reset
button depressed, if the machine doesn't start, stops while run-
ning, or if the operator experiences a mild shock,
DO NOT USE
THE MACHINE! Tag the machine out of service and take it to a
motor repair center or return it to the factory for repairs.