7
ENGLISH
150326
STAND-SPECIFIC
SAFETY
INSTRUCTIONS
1.
TO OBTAIN MAxIMUM STABILITY,
use
the miter saw stand on a flat surface ONLY.
2.
BE CAREfUL WHILE RAISINg AND
LOWERINg THE STAND
to prevent
pinching your fingers or hands.
3.
BE SURE THE SNAP BUTTONS ON
EACH LEg ARE IN THE LOCKED
POSITION
before beginning work to ensure
the stand remains rigid during cutting.
4.
DO NOT STEP OR CLIMB ON THE
STAND AT ANY TIME.
Doing so can cause
damage to the stand and/or personal injury.
5.
BEfORE OPERATION, ENSURE
THAT THE MITER SAW IS fASTENED
SECURELY TO THE STAND
to prevent
unwanted movement of the saw.
6.
BEfORE OPERATION, MAKE SURE
THAT THE MATERIAL SUPPORTS ARE
LOCKED IN PLACE.
7.
THE MAIN fRAME CAN SUPPORT UP TO
330 LB. (150 Kg) TOTAL WEIgHT (SAW
+ MATERIAL). IT IS CRITICAL THAT
YOU DO NOT ExCEED THIS WEIgHT
for
reasons of personal safety and to prevent
damage to the stand.
wARNING!
The warnings, cautions, and
instructions detailed in this manual cannot
cover all possible conditions and situations
that occur. It must be understood by the
operator that COMMON SENSE AND
CAUTION ARE FACTORS that cannot
be built into this product, but MUST BE
SUPPLIED BY THE OPERATOR.
!
