General Dynamics Itronix GoBook MR-1, Руководство по началу работы

Страница: 11 / 16

73-0174-001 2007.07.23 11
(Optional) Radio Setup
Please refer to the individual radio help files located on the desktop.
Common Functions
Refer to the online help manual, GoBook MR-1 User Help , located on the
desktop, for complete safety information, operating instructions, feature
descriptions and tips about your computer. Following are some useful
common functions:
• = to darken the display;
• = to brighten the display;
• To shutdown, select Start , Shut Down , Shut Down , then click OK (or
hit Enter ).
Calibration
Battery Calibration
The battery should be calibrated the first time you use it. This allows the
Windows battery gauge to accurately monitor battery status. Please read
the MR-1 Help for more information.
To run the Battery Calibration program:
a) Plug in the AC adapter.
b) Start the computer and boot to Windows.
c) Go to Start, All Programs, Mobile Computer Tools.
d) Select the Primary battery and click Start to begin the Calibration
process.
e) The MR-1 may be used for any tasks but must remain connected
to external (AC) power until the calibration cycle has completed.
f) Full calibration may take up to 17 hours.
NOTE The unit will not go into suspend mode while Battery Calibration is
running.
CAUTION Do not disconnect AC power while Battery Calibration is
running. Battery calibration requires external power.
CAUTION Do not remove the battery while Battery Calibration is running.
Doing so will cause the application to terminate immediately.
GETTING STARTED