Generac Power Systems XP Скачать руководство пользователя страница 4

GENErAL HAZArDS

• 

NEVER operate in an enclosed area, in a vehicle, or indoors 

EVEN IF doors and windows are open. 

• 

For safety reasons, the manufacturer recommends that the 

maintenance of this equipment is carried out by an Authorized 

Dealer. Inspect the generator regularly, and contact the nearest 

Authorized Dealer for parts needing repair or replacement.

• 

Operate generator only on level surfaces and where it will not be 

exposed to excessive moisture, dirt, dust or corrosive vapors.

• 

Keep hands, feet, clothing, etc., away from fans and other 

moving parts. Never remove any fan guard or shield while the 

unit is operating.

• 

Certain parts of the generator get extremely hot during 

operation. Keep clear of the generator until it has cooled to 

avoid severe burns.

• 

Do NOT operate generator in the rain.

• 

Do not alter the construction of  the generator or change 

controls which might create an unsafe operating condition.

• 

Never start or stop the unit with electrical loads connected 

to receptacles AND with connected devices turned ON. Start 

the engine and let it stabilize before connecting electrical 

loads. Disconnect all electrical loads before shutting down the 

generator.

• 

Do not insert objects through unit’s cooling slots.

• 

When working on this equipment, remain alert at all times. 

Never work on the equipment when physically or mentally 
fatigued.

• 

Lifting Warning Hazard: A falling generator can result in death, 

bodily injury, and/or property damage. Stand clear of generator. 
Lift is designed to carry only the weight of the generator. DO 
NOT overload lifting bracket. Apply lifting strap or hook through 
lift bar hole(s) only. DO NOT lift while generator is running.

• 

Never use the generator or any of its parts as a step. Stepping 

on the unit can stress and break parts, and may result in 
dangerous operating conditions from leaking exhaust gases, 
fuel leakage, oil leakage, etc.

• 

On electric start models, disconnect the POSITIVE (+) battery 

cable from the engine starter OR the NEGATIVE (-) battery 

cable from the battery terminal, whichever is easier, before 

transporting the generator.

• 

EXHAUST & LOcATION HAZArDS

• 

Never operate in an enclosed area or indoors! NEVEr use in 

the home, in a vehicle, or in partly enclosed areas such as 

garages,  EVEN IF doors and windows are open! ONLY use 

outdoors and far from open windows, doors, vents, and in an 

area that will not accumulate deadly exhaust.

• 

The engine exhaust fumes contain carbon monoxide, which 

you cannot see or smell. This poisonous gas, if breathed in 
sufficient concentrations, can cause unconsciousness or even 
death.

• 

Adequate, unobstructed flow of cooling and ventilating air 

is critical to correct generator operation. Do not alter the 
installation or permit even partial blockage of ventilation 
provisions, as this can seriously affect safe operation of the 
generator. The generator MUST be operated outdoors. 

• 

This exhaust system must be properly maintained. Do nothing 

that might render the exhaust system unsafe or in noncompliance 
with any local codes and/or standards.

• 

Always use a battery operated carbon monoxide alarm indoors, 

installed according to the manufacturer's instructions.

• 

If you start to feel sick, dizzy, or weak after the generator has 

been running, move to fresh air IMMEDIATELY. See a doctor, as 
you could have carbon monoxide poisoning.

ELEcTrIcAL HAZArDS

• 

The generator produces dangerously high voltage when in 

operation. Avoid contact with bare wires, terminals, connections, 
etc., while the unit is running, even on equipment connected 
to the generator. Ensure all appropriate covers, guards and 
barriers are in place before operating the generator. 

• 

Never handle any kind of electrical cord or device while 

standing in water, while barefoot or while hands or feet are wet. 

DANGErOUS ELEcTrIcAL SHOcK MAY rESULT.

Safety Rules

 2 

Содержание XP





















Отзывы: