Generac Power Systems MLT4060KV, Руководство пользователя

Страница: 27 / 40

Owner’s Manual for Mobile Light Tower 23
Maintenance
* Change the engine oil and oil filter after the initial 50 hours of operation, then at the appropriate interval thereafter.
** Replace the air cleaner element yearly, or after six cleanings, whichever occurs first.
Winch Use, Operation and
Maintenance
•
Keep the winch free of dirt, oil, grease, water and
other substances.
•
Check all mounting bolts and make sure they are
tightened to the recommended torque values.
Replace any damaged fasteners.
•
Periodically check all connections to be sure they
are tight and free of corrosion.
•
Check the cable for visible damage every time the
winch is operated. Examples of damage are: cuts,
knots, crushed or frayed portions, and broken
strands. Replace cable immediately if damaged.
Failure to replace a damaged cable could result in
breakage.
•
Regularly check the brake for slippage or drift. This
is detected visually when winch is under load. If
winch drum continues to turn after controls are
released, the brake may need to be replaced.
•
Periodically clean and grease the brake assembly.
This will ensure proper performance and extend
the life of the winch. If winch seems to labor or get
excessively hot during the lowering of loads, the
brake will need to be serviced or replaced.
•
Check motor brushes periodically and replace
when necessary.
NOTE: Only the motor brushes and brake assembly
require periodic replacement.
Winch Mechanical Brake
The mechanical brake generates heat when loads are
lowered and the wire cable is powered out. Avoid
overheating the mechanical brake.
Whine or chatter associated with a new mechanical
brake is normal and typically disappears with use.
Overheating the mechanical brake may result in
permanent damage to, or failure of, the brake. Replace
any damaged brake components before resuming use of
the winch.
Basic Maintenance Guide (Kubota Engine)
ITEM DAILY
50
Hours
100
Hours
200
Hours
400
Hours
500
Hours
1000
Hours
1
Year
Check oil level

Check coolant level

Check fuel level

Check tire pressure

Check all electrical connections

Inspect radiator fins for debris, clean as required

Inspect light tower winch for proper operation

Check fuel pipes and clamp bands

Clean air cleaner element

Clean fuel filter

Check fan belt tightness

Drain water separator

Check radiator hoses and clamp bands

Check intake air line

Replace fuel filter cartridge

Clean water separator

Lubricate leveling jacks

Remove sediment in fuel tank

Replace fan belt

Replace engine oil and oil filter

*
Replace air filter element

**