Generac Power Systems MAC400HC, Руководство пользователя

Страница: 5 / 40

Owner’s Manual for Flameless Heat Cart 1
Introduction and Safety
Section 1: Introduction and Safety
Introduction
Thank you for purchasing a Generac Mobile Products,
LLC product. This unit has been designed to provide
high-performance, efficient operation, and years of qual-
ity use when maintained properly.
The MAC400FHC flameless heat cart is designed and
built for sustained, reliable heat production in industrial
operating conditions and environments. The
MAC400FHC is built to withstand frequent handling
under these conditions.
The unit has forklift access and chain attach points on
both sides. The fully enclosed design protects the operat-
ing components, allowing all-weather storage and opera-
tions.
The information in this manual is accurate based on
products produced at the time of publication. The manu-
facturer reserves the right to make technical updates,
corrections, and product revisions at any time without
notice.
Read This Manual Thoroughly
If any section of the manual is not understood, contact
your nearest Generac Mobile Products (GMP) Autho-
rized Service Dealer (ASD), or contact Generac Mobile
Products Customer Service at 800-926-7968, or visit
http://www.generacmobileproducts.com with any ques-
tions or concerns.
The owner is responsible for proper maintenance and
safe use of the equipment.
SAVE THESE INSTRUCTIONS for future reference. This
manual contains important instructions for the unit that
should be followed during installation, operation, and
maintenance of the heater and batteries. ALWAYS supply
this manual to any individual that will use the unit.
Safety Rules
The manufacturer cannot anticipate every possible cir-
cumstance that might involve a hazard. The alerts in this
manual, and on tags and decals affixed to the unit, are
not all-inclusive. If using a procedure, work method, or
operating technique that the manufacturer does not spe-
cifically recommend, verify that it is safe for others and
does not render the equipment unsafe.
Throughout this publication, and on tags and decals
affixed to the unit, DANGER, WARNING, CAUTION, and
NOTE blocks are used to alert personnel to special
instructions about a particular operation that may be haz-
ardous if performed incorrectly or carelessly. Observe
them carefully. Alert definitions are as follows:
NOTE: Notes contain additional information important to
a procedure and will be found within the regular text of
this manual.
These safety alerts cannot eliminate the hazards that
they indicate. Common sense and strict compliance with
the special instructions while performing the action or
service are essential to preventing accidents.
How to Obtain Service
When the unit requires servicing or repairs, contact a
GMP ASD for assistance. Service technicians are fac-
tory-trained and are capable of handling all service
needs. Go to
https://www.generacmobileproducts.com/
parts-service/find-service for assistance locating a
dealer.
When contacting a GMP ASD about parts and service,
always supply the complete model and serial number of
the unit as given on its data decal located on the unit.
Record the model and serial numbers in the spaces pro-
vided on the inside front cover of this manual.
(000100a)
WARNING
Consult Manual. Read and understand manual
completely before using product. Failure to
completely understand manual and product
could result in death or serious injury.
(000001)
DANGER
Indicates a hazardous situation which, if not avoided,
will result in death or serious injury.
(000002)
WARNING
Indicates a hazardous situation which, if not avoided,
could result in death or serious injury.
(000003)
CAUTION
Indicates a hazardous situation which, if not avoided,
could result in minor or moderate injury.