Generac Power Systems GC2200T, Руководство пользователя

Страница: 19 / 84

Owner’s Manual for Trimmer/Mower™ 15
Maintenance and Troubleshooting
Section 4: Maintenance and Troubleshooting
Maintenance
Regular maintenance will improve performance and extend
engine/equipment life. Regular maintenance, replacement,
or repair of the emissions control devices and systems may
be performed by any repair shop or person of the owner’s
choosing. To obtain emissions control warranty service
free of charge, contact Generac Customer Service at 1-
888-436-3722 (1-888-GENERAC), or
www.gen-
erac.com . See the emissions warranty.
(000102)
WARNING
Accidental Start-up. Disconnect spark plug wire
when working on unit. Failure to do so could result
in death or serious injury.
(000108)
WARNING
Hot Surfaces. When operating machine, do not
touch hot surfaces. Keep machine away from
combustibles during use. Hot surfaces could
result in severe burns or fire.
Procedure
Before
Each Use
Every 25
Hours
Every 50
Hours
Every 100
Hours
Check engine oil level

Clean engine exterior, cooling fins, and remove collected grass*

Check general equipment condition

Replace broken or frayed cutting cords

Check Mow-Ball line plates for excessive wear

Replace the trimmer belt. See
Replacing Trimmer Belt
for
more information.

Lubricate throttle cable and trimmer control cable with SAE 30 oil 
Replace engine oil
1st time 5
hours

Replace engine air filter cartridge and foam pre-filter if equipped 
Remove trimmer guard and clean out any collected debris

Replace spark plug 
* Cleaning the top of the engine during use is critical for proper air flow.
Maintenance Schedule