Generac Power Systems G0074000 Скачать руководство пользователя страница 12

Страница: 12 / 32

General Information

Automatic Transfer Switch Owner’s Manual

Accessories

Accessory

Description

G0074000
RBU Transfer Switch Upgrade Kit

Includes all pieces to perform conversion of a RBU Meter Main into a RXUW Transfer
Switch.

G0074010
Ring Style Meter Cover

Replacement outer top cover and sealing ring for ring style meter retainment.
Verify you have the proper type to meet local code requirements.

G0074020
Fifth Jaw Metering Kit

Includes all pieces necessary to perform conversion of the standard Four Jaw Meter Socket
into a Five Jaw Meter Socket.
Verify you have the proper type to meet local code requirements.

G0074030
Horn Bypass Meter Jaws

Replacement meter jaws for horn bypass type meter sockets. Verify you have the proper
type to meet local code requirements.

G0074040
Meter Safety Flash Shield

Safety flash shield for standard and horn bypass type meter jaws. Used with ring-less style
meter retainment.

G0074050
Side Connection Lug Kit

Includes all pieces necessary to convert the standard four jaw meter socket into a socket
with side lug line connections.

G0074060
24 in. Pedestal Extension Kit

Includes all pieces to extend the transfer switch enclosure by 24 in. for underground service
feed.

G0074070
48 in. Pedestal Extension Kit

Includes all pieces to extend the transfer switch enclosure by 48 in. for underground service
feed.

A0000018981
Ultrasonic Cleaner Solution

Cleaning solution safe for metal and plastic surfaces. Contains 1 gal (128 oz).

A0000019001
Corrosion Inhibitor and Protectant

Protectant for outdoor plastic, rubber, leather and vinyl surfaces. Contains 0.12 gal (15 oz).

Содержание G0074000

































Результаты поиска

Содержание G0074000

Отзывы:

Бренды по названию

Популярные бренды

Generac Power Systems G0074000, Руководство пользователя

Результаты поиска

Содержание G0074000

Отзывы:

Бренды по названию

Популярные бренды