Generac Power Systems DF 2.2, Руководство пользователя

Страница: 10 / 16

6 Owner’s Manual for DF 2.2 Dust Suppression System
General Information
Setup
Water System Connection
1. See Figure 2-2 . Verify water valve (A) is closed.
Figure 2-2. Connecting Water Supply
2. Connect water supply to water fitting (B).
Electrical Connection
1. See Figure 2-3 . Verify switch (A) is in OFF position.
Figure 2-3. Electrical Connection
2. Connect to socket (B) 240v power with the
following requirements:
• Extension cord must be marked “WA” or indicate it
is suitable for outdoor use.
• Power source must be equipped with residual-
current device (RCD) protection.
• Use adequately sized extension cords of
appropriate length. See
Table 1 for recommended
cable size and length.
WARNING
(000584)
Personal injury. Only use water from controlled, reliable
sources. Uncontrolled water could contain bacteria. Inhaling
mist containing bacteria could result in death, or serious
injury.
A
B
008852
Table 1 - Recommended Shore Power Cable
Size and Length
Suggested Power Cables and Lengths
50 ft. (15.2 m) 10/3—(L5-20P – L5-20R)
100 ft. (30.5 m) 12/3—(5-15P – 5-15R)
(000145)
DANGER
Electrocution. In the event of electrical accident,
immediately shut power OFF. Use non-conductive
implements to free victim from live conductor. Apply
first aid and get medical help. Failure to do so will
result in death or serious injury
.
(000152)
DANGER
Electrocution. Verify electrical system is
properly grounded before applying power.
Failure to do so will result in death or serious
injury.
(000104)
DANGER
Electrocution. Water contact with a power
source, if not avoided, will result in death
or serious injury.
A
B
008853