Generac Power Systems 00847-1, Руководство по эксплуатации и установке, Страница: 15 / 40

Figure 3.11 — Exercise Timer
3.5 SETTING THE EXERCISER
3.5.1 DISPLAY
3.5.1.1 Current Time
The current time is selected with the time/alarm
push-button and is displayed in 12:00 hour format
on four 7-segment LED displays. The colon flashes at
a rate of 0.5 seconds on/off to indicate normal oper-
ation and display of the current time.
3.5.1.2 Exercise Time
The exercise time is selected with the time/alarm
push-button, the exercise time for the selected day is
displayed in a similar format to current time, except
that the colon does not flash but is always ON to indi-
cate the exercise time is being displayed.
To change the exercise day being displayed, use the
“day” push-button when in this mode.
3.5.1.3 PM (Time)
A single LED indicates PM (ON) time or AM (OFF).
3.5.1.4 Day of Week
The day of the week is indicated on the seven indi-
vidual day LEDs which represent Sunday through
Saturday.
3.5.1.5 Exercise ON
A single LED indicates that the relay output is
switched ON (exercise period).
3.5.1.6 Power Saving
To minimize the power consumption of the unit, it
will switch to a “dim” display mode if no keyboard
activity is noted for five minutes. The display bright-
ness is reduced to 50% of normal, but returns to
100% when any key is pressed.
3.5.1.7 Default Times
When the exerciser is first powered up, or if power is
removed from the unit and the battery backup has
expired, the default times will revert to:
Current Time 9:00 am
Current Day Sunday
Sun.-Sat. Exercise 9:00 am
Exercise Period 20 minutes
3.5.2 EXERCISE TIMES
The exercise times may be set individually on a day
by day basis. Exercise periods can overlap days, i.e.,
if a time is set for 11:55 pm Sunday for 20 minutes,
it will turn off at 12:15 am Monday.
The exercise period is globally programmable (com-
mon to all days), and is limited from 10-59 minutes.
3.6 PUSH BUTTONS
3.6.1 UP ARROW
↑↑
The up arrow is used to step the time forward in
increments of one second. This feature has auto-
acceleration, if the button is held on, the step incre-
ments will progressively increase to allow fast search-
ing of a required time. As soon as the button is
released, it will revert to normal speed.
3.6.2 DOWN ARROW
↓↓
The down arrow is used to step the time backward in
increments of one second. It also has auto-acceleration.
3.6.3 TIME (TIME/ALARM TOGGLE)
This toggles the display between normal current time
and exercise time. When in exercise time mode the
following happens:
1. The colon stops flashing to indicate exercise time
mode.
2. The Sun LED flashes to indicate it is initially
selected. The rate of flashing is either:
a. 50:50% on/off to indicate exercise time is
enabled.
b. 90:10% on/off to indicate exercise time is not
enabled.
3. All other days that have exercise time enabled to
ON are indicated by LED on. Days that are dis-
abled are set to LED off.
‹
‹
‹
‹
✧
✧
✧
✧
✧
✧
✧
‹
Generac ® Power Systems, Inc. 13
Section 3 — Operation
Generac APS 6.0 DC Auxiliary Power System
9 V Battery
(not supplied)