Generac Power Systems 005792-0 Скачать руководство пользователя страница 3

Thank you for purchasing this model by Generac Power Systems, 

Inc.  This model is a compact, high performance, air-cooled, 

engine driven generator designed to supply electrical power to 

operate electrical loads where no utility power is available or in 

place of utility due to a power outage.

If any portion of this manual is not understood, contact the nearest 

Authorized Dealer for starting, operating and servicing procedures.
The operator is responsible for proper and safe use of the 

equipment. We strongly recommend that the operator read this 

manual and thoroughly understand all instructions before using the 

equipment. We also strongly recommend instructing other users to 

properly start and operate the unit. This prepares them if they need 

to operate the equipment in an emergency. Save these instructions 

for future reference. If you loan this unit to someone, ALWAYS loan 

these instructions to the individual as well.
The generator can operate safely, efficiently and reliably only if it 

is properly located, operated and maintained. Before operating or 

servicing the generator:
•  Become familiar with and strictly adhere to all local, state and 

national codes and regulations.

•  Study  all  safety  warnings  in  this  manual  and  on  the  product 

carefully.

•  Become familiar with this manual and the unit before use.
The manufacturer cannot anticipate every possible circumstance 

that might involve a hazard. The warnings in this manual, and on 

tags and decals affixed to the unit are, therefore, not all inclusive. 

If using a procedure, work method or operating technique that the 

manufacturer does not specifically recommend, ensure that it is 

safe for others. Also make sure the procedure, work method or 

operating technique utilized does not render the generator unsafe.
THE INFORMATION CONTAINED HEREIN WAS BASED ON 

MACHINES IN PRODUCTION AT THE TIME OF PUBLICATION. 

GENERAC RESERVES THE RIGHT TO MODIFY THIS MANUAL AT 

ANY TIME. 

Throughout this publication, and on tags and decals affixed to the 

generator, DANGER, WARNING, CAUTION and NOTE blocks are 

used to alert personnel to special instructions about a particular 

operation that may be hazardous if performed incorrectly or 

carelessly. Observe them carefully. Their definitions are as follows:

INDICATES A HAZARDOUS SITUATION OR 

ACTION WHICH, IF NOT AVOIDED, WILL RESULT 

IN DEATH OR SERIOUS INJURY.

Indicates a hazardous situation or action which, 

if not avoided, could result in death or serious 

injury.

Indicates a hazardous situation or action which, 

if not avoided, could result in minor or moderate 

injury.

NOTE:

Notes contain additional information important to a procedure 

and will be found within the regular text body of this manual.

These safety warnings cannot eliminate the hazards that they 

indicate. Common sense and strict compliance with the special 

instructions while performing the action or service are essential to 

preventing accidents.
Four commonly used safety symbols accompany the 

DANGER

WARNING

 and 

CAUTION

 blocks. The type of information each 

indicates is as follows:

This symbol points out important safety 
information that, if not followed, could 

endanger personal safety and/or property of 

others.

This symbol points out potential explosion 

hazard.
This symbol points out potential fire hazard.

This symbol points out potential electrical 
shock hazard.

GENERAL HAZARDS

•  Never operate in an enclosed area or indoors EVEN IF doors and 

windows are open. 

• For safety reasons, the manufacturer recommends that the 

maintenance of this equipment is carried out by an Authorized 

Dealer. Inspect the generator regularly, and contact the nearest 

Authorized Dealer for parts needing repair or replacement.

•  Operate generator only on level surfaces and where it will not be 

exposed to excessive moisture, dirt, dust or corrosive vapors.

•  Keep hands, feet, clothing, etc., away from drive belts, fans, 

and other moving parts. Never remove any fan guard or shield 

while the unit is operating.

• Certain parts of the generator get extremely hot during 

operation. Keep clear of the generator until it has cooled to 

avoid severe burns.

•  Do NOT operate generator in the rain.
• Do not alter the construction of  the generator or change 

controls which might create an unsafe operating condition.

• Never start or stop the unit with electrical loads connected 

to receptacles AND with connected devices turned ON. Start 

the engine and let it stabilize before connecting electrical 

loads. Disconnect all electrical loads before shutting down the 

generator.

•  Do not insert objects through unit’s cooling slots.
• When working on this equipment, remain alert at all times. 

Never work on the equipment when physically or mentally 

fatigued.

1

Introduction

Содержание 005792-0



















Отзывы: