Generac Portable Products 5000ES, Руководство пользователя

Страница: 6 / 20

Generac Portable Products 5000/6250ES Generator
6
• Connect the red battery cable from the engine start
button to the positive (+) terminal on battery
(Figure 4).
• Connect the black battery cable to the negative (–)
terminal on battery (Figure 4).
• Connect the other end of the black cable to the engine
as shown.
WARNING!
Do Not connect the black battery
cable to any other location.
• Double check all connections to ensure they are in the
correct locations and secure.
BEFORE STARTING THE
ENGINE
Add Oil
CAUTION!
Any attempt to crank or start the engine
before it has been properly filled with the recommended oil
may result in an engine failure.
To fill your engine with oil:
• Place generator on a level surface.
• Clean area around oil fill and remove oil fill cap.
• Select the oil's viscosity grade and fill engine with oil
following the instructions given in the engine owner’s
manual. Do Not overfill!
• Install oil fill cap.
NOTE: The generator’s revolving field rides on a pre-
lubricated and sealed ball bearing that requires no
additional lubrication for the life of the bearing.
Add Gasoline
WARNING!
Never fill fuel tank indoors. Never
fill fuel tank when engine is running or hot. Do Not
light a cigarette or smoke when filling the fuel tank.
WARNING!
Do Not overfill the fuel tank.
Always allow room for fuel expansion.
• Use regular UNLEADED gasoline with the generator
engine. Do Not use premium gasoline. Do Not mix oil
with gasoline.
• Clean area around fuel fill cap, remove cap.
RED wire from
Start Button
BLACK wire from
engine mount
Figure 4 — Connect Battery Cables