English 7
Mounting options
The 8030C offers several mounting options: The
Iso-Pod™ (Isolation Positioner/Decoupler™)
vibration insulating table stand allows tilting of the
loudspeaker for correct alignment of the acoustic
axis. The stand can be attached to three mounting
points allowing vertical and symmetrical horizontal
positioning. On the base of the loudspeaker is
a 3/8” UNC threaded hole compatible with a
standard microphone stand. On the rear there are
two M6x10 mm threaded holes for Omnimount®
size 20.5 brackets.
Maintenance
No user serviceable parts are to be found within
the amplifier unit. Any maintenance or repair of the
8030C unit should only be undertaken by qualified
service personnel.
Safety considerations
Although the 8030C has been designed in
accordance with international safety standards,
the following warnings and cautions should be
observed to ensure safe operation and to maintain
the loudspeaker under safe operating conditions:
• Servicing and adjustment must only be
performed by qualified service personnel. The
loudspeaker must not be opened.
• Do not use this product with an unearthed
mains cable as this may compromise electrical
safety.
• Do not expose the loudspeaker to water or
moisture. Do not place any objects filled with
liquid, such as vases on the loudspeaker or
near it.
• This loudspeaker is capable of producing
sound pressure levels in excess of 85 dB, which
may cause permanent hearing damage.
• Free flow of air behind the loudspeaker is
necessary to maintain sufficient cooling. Do not
obstruct airflow around the loudspeaker.
• Note that the amplifier is not completely
disconnected from the AC mains service unless
the mains power cord is removed from the
amplifier or the mains outlet.
Guarantee
This product is guaranteed for a period of two years
against faults in materials or workmanship. Refer to
supplier for full sales and guarantee terms.
Compliance to FCC rules
This device complies with part 15 of the FCC Rules. Operation
is subject to the following conditions:
This device may not cause harmful interference, and
This device must accept any interference received, including
interference that may cause undesired operation.
Note: This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to part 15
of the FCC Rules. These limits are designed to provide rea-
sonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accord-
ance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that in-
terference will not occur in a particular installation. If this equip-
ment does cause harmful interference to radio or television re-
ception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference
by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for
help.
Modifications not expressly approved by the manufacturer
could void the user’s authority to operate the equipment under
FCC rules.
