4 English
Mounting options
The 8010A offers several mounting options: Iso-
Pod™ (Isolation Positioner/Decoupler™) vibration
insulating table stand allows tilting the monitor
towards the listener. On the rear, there are three
pairs of threaded holes compatible with Omni-
mount
®
, VESA, and Sanus brackets. For a full list of
available options, please consult Genelec’s acces-
sories catalogue at www.genelec.com or contact
your Genelec dealer.
Maintenance
No user serviceable parts are to be found inside the
unit. Any maintenance or repair of the 8010A should
only be done by qualified service personnel.
Safety considerations
Although the 8010A has been designed in accord-
ance with international safety standards, the follow-
ing warnings should be observed to ensure safe op-
eration and to maintain the monitor in safe operating
conditions:
•
Servicing and adjustment must only be
performed by qualified service personnel. The
monitor must not be opened.
•
Do not expose the monitor to water or
moisture. Do not place any objects filled with
liquid, such as vases, on the monitor or
near it.
•
This monitor is capable of producing sound
pressure levels in excess of 85 dB, which may
cause permanent hearing damage.
•
Free flow of air behind the monitor is
necessary to maintain sufficient cooling. Do not
obstruct airflow around the monitor.
•
T h e a m p l i f i e r i s n o t c o m p l e t e l y
disconnected from the AC mains service unless
the mains power cord is removed from the
amplifier or the mains outlet.
Guarantee
This product is guaranteed for a period of two years
against faults in materials or workmanship. Refer to
supplier for full sales and guarantee terms.
Compliance to FCC rules
This device complies with part 15 of the FCC Rules. Operation is subject to the fol-
lowing two conditions:
This device may not cause harmful interference, and this device must accept any
interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interfer-
ence to radio communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one or more
of the following measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and receiver.
•
Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
•
Consult the dealer or an experienced radio/TV technician for help
Modifications not expressly approved by the manufacturer could void the user’s au-
thority to operate the equipment under FCC rules.
Содержание 8010A
Страница 1: ...8010A Operating Manual ...
