Genelec 7050C Скачать руководство пользователя

Страница: 5 / 16

The “LFE +10 dB” function should not be

used in the following cases:

• If the +10 dB LFE gain is already

implemented by another device, for
example, a surround sound processor or
the output matrix of a mixing console.

• When producing an audio format that

does not require the use of +10 dB gain
on the LFE channel.

Bypass

The Bypass input accepts a 6.3 mm tip-ring-
sleeve (TRS) or tip-sleeve (TS) plug. This
plug supports a contact open/close switch
device. Connecting the TIP to the SLEEVE
activates the bass management bypass.
When the bass management bypass is
active, the subwoofer only reproduces the
LFE signal and the outputs bypassed to the
monitors are exact copies of the inputs.

Safety Considerations

Genelec 7050C subwoofer has been
designed in accordance with international
safety standards. However, to ensure safe
operation and maintain the unit in safe
operating condition, the following warnings
and cautions must be observed:

• Servicing and adjustment must only be

performed by qualified service

personnel. The subwoofer cabinet or

electronics unit must not be opened.

• Do not use this subwoofer with an

unearthed mains cable or an unearthed

mains connection as this may

compromise electrical safety.

• Do not expose the subwoofer to water

or moisture. Do not place any objects

filled with liquid, such as vases on the

subwoofer or near it.

• This subwoofer is capable of producing

sound pressure levels in excess of

85 dB, which may cause permanent

hearing damage.

• Free flow of air around the subwoofer is

necessary to maintain sufficient cooling.

Do not obstruct airflow around the

subwoofer.
• Note that the subwoofer is not

completely disconnected from the

AC mains service unless the mains

power cord is removed from the

subwoofer or the mains outlet.

Warning!
This subwoofer is capable of delivering sound
pressure levels in excess of 85 dB, which
may cause permanent hearing damage.

Figure 8. The curves above show the
harmonic distortion analysis of the
7050C in free field. In half space the
SPL will be 6 dB higher.

Figure 7. The free field frequency
response of the 7050C subwoofer at
different Bass Roll-Off settings

7050C

2 channel

system

5 channel

system

8020

8030

M030

8010

8020

Room volume up to

75 m

/ 2647 ft

Maintenance

No user serviceable parts are inside the
subwoofer. Any maintenance of the unit
must only be performed by qualified service
personnel.

Guarantee

This product is supplied with a two year
guarantee against manufacturing faults or
defects that might alter the performance of
the unit. Refer to supplier for full sales and
guarantee terms.

Compliance to FCC Rules

This device complies with part 15 of the FCC
Rules. Operation is subject to the following
two conditions:

• This device may not cause harmful

interference, and

• This device must accept any interference

received, including interference that may
cause undesired operation.

Note: This equipment has been tested and
found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide
reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses and can
radiate radio frequency energy and, if not
installed and used in accordance with the
instructions, may cause harmful interference
to radio communications. However, there
is no guarantee that interference will not
occur in a particular installation. If this
equipment does cause harmful interference
to radio or television reception, which can
be determined by turning the equipment
off and on, the user is encouraged to try to
correct the interference by one or more of
the following measures:
• Reorient or relocate the receiving