use only. The permissible ambient
temperature is 15-35 degrees Celsius (50-
95°F) and permissible relative humidity
between 20% and 80%. Humidity
condensation on the product is not
allowed during use. For instance, if the
product has been stored or transported
in a cool environment and then taken into
a warm room, it must be allowed to warm
up to the ambient temperature before
connecting to mains power.
Mounting Considerations
Place the monitor so that its acoustic axes
are aimed towards the listening position
(see Figures 1 and 2). Place monitors
with left-right symmetry and at an equal
distance from the listening position.
Acoustic reflections from objects close
to monitors and the listening position
can cause colouration and blurring of the
sound image. Symmetrical positioning of
reflective objects maintains good stereo
imaging. When soffit (flush) mounting, the
wall surface should extend to the monitor,
forming a continuous surface.
Figure 3. GLM network cabling
Figure 1. The location of the acoustic axis.
L
R
C
30
0
RS
LS
100 120
0 -
0
Figure 2. Recommended placement
and alignment of monitors in a 5-chan-
nel system (ITU-R BS.775-1)
LISTENING
POSITION
MICROPHONE
GLM
NETWORK
GLM
NETWORK
GLM
NETWORK
USB
RAM-L
Figure 4. Connector panel of the RAM-L amplifier.
LED CONNECTOR
CONNECT ONLY TO GENELEC NETWORK.
ANALOG
IN
DIGITAL IN
AES/EBU
DIGITAL THRU
AES/EBU
MAINS INPUT
50 / 60 Hz 750 W
100 - 230 V~
SERIAL NUMBER
MIDRANGE /
TWEETER
WOOFER
LOUDSPEAKER CONNECTORS
RAM-L AMPLIFIER
MODULE
www.genelec.com
MADE IN FINLAND
CONTROL NETWORK
2
1
3
THRU
IN
1
1
2
3
3
2
-
GND
+
DIRECT
LOUDSPEAKER
CONNECTOR
CONSULT OPERATING
MANUAL BEFORE
OPENING !
ANALOG
AUDIO
INPUT
DIGITAL
AUDIO
INPUT
DIGITAL
THRU
CONNECTOR
CONTROL
NETWORK
CONNECTORS
LOUDSPEAKER CONNECTOR GROUP
MAINS
CONNECTOR
Cable gauge
Max. length
2.0 mm
2
(14 AWG)
30 m (100 ft)
3.3 mm
2
(12 AWG)
40 m (130 ft)
5.3 mm
2
(10 AWG)
60 m (200 ft)
Table 1. Recommended cable thicknesses
for different lengths of signal cable
