CONNECTING ROUTER
Warning: Use only the router’s box power supply.
* Connect antennas to the router. Make sure to tighten antennas so that
they are not loose.
* Plug AC/DC adapter cable into POWER CONNECTOR on the router.
* Plug AC/DC adapter into the wall power socket.
* Display will turn on.
* Wait approximately 53 seconds for the router to become fully operational.
* Plug one side of ETHERNET CABLE to ETHERNET CONNECTOR on a router.
* Plug the other side of ETHERNET CABLE to Ethernet port on the computer.
* You will see on display if SIM card is present, cellular network types, signal
level, current firmware version (or IP address), uptime, number of LAN ports.
5
