• USB receiver pop-up - Please put the USB receiver to storage compartment at the
bottom of remote control, the whole remote control will be in turnoff status when
USB receiver put and its standby current is zero. If you want to use the remote
control, please press “USB receiver pop-up” button to pop-up the receiver
Connection operation
When remote control can not control computer during use, you need to re-connect
the remote control. Please follow the instructions below:
1- Plug USB receiver to computers USB port, press “Receiver connection” button,
the indicator on the USB receiver will flash quickly, then press “Remote control
connection” button on the remote control while the receiver is flashing, the indicator
on the USB receiver will stop flashing when connection is successful.
Specification
Remote Control
Frequency
2.4G Hz
Remote control distance
Within 10 Meters, control from different angles
Laser distance
More than 100 meters
Battery
AAAx2pcs
Working voltage
2.4 - 3.0V
Standby current
0.1mA
Dimensions
104*46*22.5mm
Weight
35g
USB Receiver
Operation system
Windows 98/SE/ME/2000/XP
USB Port
USB 1.1, USB 2.0
Working voltage
USB cable supply power (4.6-5.5V)
Dimensions
54*17*4mm
Weight
20g
