Genee World GV2100, Руководство пользователя, Страница: 9 / 20

Connections
DC-12V IN
: External 12V power adaptor input connection
S-VIDEO-OUT/VIDEO-OUT : Visualiser video output
RGB-OUT1/RGB-OUT2 : RGB output (output the same signal)
RGB-IN : Laptop, computer or other RGB signal input
USB : Computer image capture and video recording for both PC
and MAC
3. You must use the high speed USB cable provided
4. When connecting the visualiser to a desktop computer using the high
speed USB cable provided, we recommend using the USB port located
on the rear of the mainframe. The USB port on the front of the computer
might have interference.
5. You may need to install the USB driver again when you change a
computers USB port. If this port has USB 2.0 driver installed, there is no
need to install the USB driver again
6. If you cannot capture images under the Video Capture program, you
need to set the signal input source as follows: click “Option” - “Video
crossbar”, and then set INPUT as Video Composite In.
USB capture for MAC computers
Copy the folder “Mac Driver” into MAC hard disk, open the folder and dou-
ble click “Empia 1.0.0b2.zip”, the “setup” file appears. Following the screen
notice, click “Next” and finish installation.
Notes
1. Please connect the MAC computer and visualiser when installing the
driver
2. Please use the USB 2.0 cable provided with your visualiser
Video display and capture
You can capture and control images on the visualiser from a computer
connected with a USB connector
Click [Start] - [Program] - [VideoCap] - “VideoCapx.xx” (x.xx is softwares
version) to open the software
A. Static Image Setup
Click “Capture” - “Capture Frame”, input the file name in dialogue box, or
you can click icon on the toolbar, then input file name in dialogue window.
The image file is JPG format
Installing the Software
The function of the Video Cap software is to snap and display images
with the USB interface, which includes displaying static and dynamic
pictures, snapping dynamic images and playback the dynamic images
with the Windows Media Player or similar player.
A. Insert the CD-ROM that comes with your visualiser into the CD-ROM
drive. if Auto run is enabled on your system, then the Software Setup
window will be displayed automatically as below.
If it does not start automatically, after inserting the CD-ROM, click
[Start] -> [My Computer], and then double click (the CD-ROM
drive letter might be different in different computer systems) and then
the above screen will appear immediately
B. Click the Install DirectX9.0 button to install Microsoft DirectX9.0
C. Click the Install Capture Program button to install the program that
captures images in the AVI or Bitmap format
D. Click the Install USB Driver button to install the driver designed for
the visualiser and will be used by the Capture Program
E. After the installation is finished, then click the Exit button to exit the
Software Setup Window
F. Shut down your computer when prompted in order for the changes to
take effect
G. Use the USB2.0 cable provided to connect your computer to the
visualiser before your computer is restarted
H. Turn on the visualiser
Remarks: DirectX9.0 is not necessary to install, it is mainly for computer
print screen function
Please pay attention to the following:
1. Computer hardware requirements; CPU: Pentium 4 2.0G or above,
RAM: 256M or above, USB 2.0 port, Hard disk 40G or more
2. Operating system: Windows 2000 or above. If the operating system
is Windows 2000, should install SP4. If the operating system is
Windows XP, you should install SP1
1. Use one hand to hold the base of the visualiser and use the other
hand to carefully lift up the mirror stand of the unit
2. Place the camera stand to the maximum position
3. Rotate the camera head, make sure that mark E on the Camera
head is in line with mark B on the camera stand
ATTENTION : When mark E is in line with A, the camera head and the base are
parallel. When mark E is in line with mark D, the camera head and the base are
vertical. When the visualiser is folded, mark E is in line with mark C