06
Software Calibration
To function properly, the handwriting of the projected image on the touch LED
display should coincide with the actual one, aiding it to calibrate accurately. The
following situations need calibration.
•
The touch LED display is used for the first time.
•
The drive has been reinstalled.
•
The computer connected to the touch LED display has been changed
•
The touch LED display is with nine-point calibration. Steps for calibration are as
follow:
1. Connect all devices necessary and run the touch LED display drive.
2. Click the drive icon of the touch LED display at the right bottom of the screen and
you can see the following:
3. Choose “9 Points” and click “calibrate” as shown below.
