Backrest-
Backrests on all models are height adjustable by
removing the two bolts and locknuts shown in the diagram to the
right. Do not set the backrest to any position other than the ones
illustrated here, and always use both bolts and locknuts.
Rear Wheels-
Rear wheel position is adjustable to change seat
to floor height. If these settings are changed, the caster settings
must also be changed to keep a safe seat angle. Use the chart
below to attain proper wheel position for desired seat height. For
safe operation of wheelchair only use these settings.
Casters-
Caster wheel position is adjustable to match rear wheel settings. Use the chart below to
match correct wheel position with desired seat height. For safe operation of wheelchair only use
these settings.
