RXC-3080
Hardware Installation and User Guide
9000-0000-042 Revision 06
44 of 45
Genave Electronics
TF Card (MicroSD) Characteristics
All TF cards are not created equal. Use only 2BG TF cards manufactured by
Sandisk. These cards will play consistently throughout all of the song files. Failure
to use Sandisk TF cards may result in loss of audio from the ADPCM module.
How To Program The TF Card
To a computer, a TF card looks exactly like a USB memory stick or hard drive. Remove the TF card
from the RXC-3080 and insert it into a USB TF card reader. Plug the USB reader into a USB port on
your computer and the operating system will locate the card and start
working with it.
Once you have converted the audio files from wave to the .ad4 format,
you can copy them directly to the TF card. Put the TF card back into the
RXC-3080 and start playing the files.
How To Put A Song On to a TF Flash Card
Please refer to the Programming Guide 9000-0000-041 for more
information
Misc
Fuse
The RXC-3080 uses one fuse to supply power to the board and the radio.
The fuse type is a fast acting 5mm x 20mm glass fuse, 250V, 2 Amp
LCD Display Backlight
The LCD backlight for the RXC-3080 will automatically turn off to conserve power.
All that is required to turn it back on is to rotate the Twist-n-Touch knob.
Heartbeat LED
The Heartbeat LED flashes once per second to indicate that the RXC-3080 is alive and well. If this
LED is not flashing, the unit may have a problem.
