MOUNTING LIGHT
UNIT DIRECTLY ON
CAMERA OR TRIPOD
POWERING
DEVICE USING
BATTERY
· Begin by holding a fully-charged battery in
position over mounting area, leaving only
a small gap between conductor contacts
found on battery and metal prongs found
on unit
· Push battery down and lock into place by
sliding it inward along grooves until an
audible click is heard
· Rotate power & dimming wheel upwards
into ON position to turn LED light on; adjust
wheel to achieve desired light intensity
· Battery can be removed by sliding it away
from metal conductor prongs found on unit
and lifting it upward
· Begin by positioning light directly over the
camera or tripod
· For cold shoe mounting, ensure that shoe
found on bottom of LED light unit is of
adequate height by adjusting locking ring
above shoe. Then slide entire shoe into
cold shoe of camera. Verify that locking
ring above shoe is properly tightened to
lock in place securely
· For tripod installation, simply insert 1/4 20
screw found on tripod head into the 1/4 20
threading mount found on bottom of unit,
then tighten securely
ins
tr
uC
ti
Ons
LED-5300 - USER MANUAL
8
