Genano Elixair E600, Руководство пользователя

Страница: 6 / 12

6
Installation
Free standing floor installation
Position the product vertically on an even base in close vicinity of the room fresh
air ventilation. Ensure that the air inlets in the bottom sides or the clean air outlet
on top of the product are not covered by other objects. Connect the power
supply cord to a wall socket with Protective Earth (PE) connection.
For safety of use ensure in all installations that the AC power cable can be
detached easily.
Do not install the product in wet locations, outdoors, or sheltered outdoor areas
without temperature control.
Wall Installation
Make sure the wall can handle the weight of the unit. Measure the distance
between hanging holes. Install wall anchors and screws accordingly and place the
unit on the screws. Also horizontal installation is possible.
!
The product shall be used and stored indoors.
!
Do not use the product in vicinity of concentrated flammable gases, liquids, or
large amounts of dust. The product’s internal operation may ignite the concen-
trated gases or dust.
!
Do not use the product in rooms without fresh air ventilation.
!
Connect the product with the AC power cord delivered with the product
package.
!
Use only AC power cord rated 220-240 Vac and with ground (PE) connection.
Wire diameter >1.5 mm2.
!
Do not position the product so that it is difficult to operate if disconnection is
necessary.
!
The product shall not be used without legs when in free standing installation