Gen2wave SELD A10, Руководство пользователя

Страница: 6 / 17

Charging interface
6

A10 charging
①
The A10 battery can be charged by plugging in power to the A10 USB-C port.
②
Regardless of the A10 power status, it can always be charged.
③ When charging, the charging status LED of the A10 lights up, red when charging, and green when charging is complete.

Smartphone charging
①
If charge the A10 when the A10 power is off, the A10 and the smartphone are charged at the same time.
②
If the power of the A10 is on, the smartphone will not be charged even if the power of the A10 is connected.
③
To charge your smartphone with A10 battery power, you can charge your smartphone by pressing the right and left
function buttons simultaneously for 1 second while the A10 power is off.
When the smartphone is charged with the battery power of A10, the power LED of A10 flashes blue.
Note. A10 supports high-speed charging.
Adapter voltage must be 5~12V and current is 1.5 or higher recommended.
Can quickly charge a smartphone that supports A10 and fast charging.
A10 USB charging and smartphone data connection are possible when connected to a PC while the A10 is powered off.
Caution. Charging will be very slow when using a USB port on a PC or laptop or a low capacity adapter.
When the A10 battery drops below 20%, the A10 battery stops charging the smartphone.
A10 charing status LED
A10 Flashes blue when in smartphone charging mode