Charging Interface
6
AC Charging
①
Open the “USB & DC Jack” Cover.
②
Insert the DC Jack in the DC Jack hole.
③
Battery LED indicates as follows
OFF : Not Charging
Red LED : Charging
Green LED : Fully Charged
Micro USB Charging
①
Use as USB charger to charge the terminal from a power outlet or connect the cable to a high-power USB port to charge from a host device
②
Battery LED indicates as follows :
OFF : Not Charging
Red LED : Charging
Green LED : Fully Charged
※
Adapter voltage must be 5V and current is 2A or higher recommended.
※
Charging the battery though a USB port of PC or laptop, or using non recommended output adaptor takes more time.
①
②
③
Charging LED
Caution. When you use the device for the first time or after time or after not using for long period of time, please charge enough time before using.
Even though you connect the charger, the device may not turn on in the very low voltage state. Please charge the device for 30 minutes ~ 1 hour first.
The device will turn on automatically and the charge LED will turn on red.
①
②
Charging LED
※
5V/2A