Rev. 10-11-04
©
Copyright 2004 Gemtor, Inc.
Page 7 of 8
W
ARNINGS
:
DO NOT USE IF:
The device appears to be damaged.
The webbing is worn or partially cut.
The locking snap hook does not function properly.
The webbing does not retract properly.
The device does not lock and stop the webbing.
The unit has arrested a fall.
The energy absorber has elongated.
The unit has not inspected by a competent person within the last 12
months
•
DO NOT attempt to adjust, repair or modify Sentry Self-Retracting
Lanyards; for prompt repair or reconditioning, return the unit to
Gemtor Inc., prepaid.
•
NEVER ALLOW WEBBING TO RETRACT FREELY.
•
DO NOT use steel cable near electrical lines or equipment.
•
DO NOT attach more that one worker to the device.
•
DO NOT use for lifting or towing.
•
DO NOT use as a work positioning device.
•
DO NOT attach anything to the snaphook at the end of the
retractable lanyard to extend its length beyond its designed length.
•
NEVER clamp off or stand on webbing nor allow webbing to
become slack during use.
•
NEVER allow webbing to cross under or wrap around the legs,
arms, neck or torso of the user or other workers.
•
NEVER work above the anchor point.
•
ALWAYS work directly under the anchor point. Worker must be
vertically in line with device to avoid swing-fall injuries (pendulum
effect).
ALWAYS rig to allow a minimum of 3 ft. clearance to the next lower
level or obstructions below.
IF YOU HAVE ANY QUESTIONS CONCERNING THE CORRECT
USAGE OF THIS OR ANY GEMTOR PRODUCT, DO NOT USE,
CALL (TOLL FREE) 1-800-405-9048
Do not try to adjust, repair or modify Gemtor Self-Retracting Lanyards; for
prompt service, please contact:
GEMTOR, INC.
One Johnson Avenue
Matawan, NJ 07747
732-583-6200