7
Connecting the Cables
Outdoor Connection:
Connect a grounding cable between the Ground
terminal of the LTE outdoor CPE and a good ground connection.
Preparing and connecting the cable:
Use only
5E 4x2x24# FTP (or
above) outdoor Shielded Patch Cable
from an approved manufacturer.
1.
Insert the RJ-45 cable:
Insert the Cat5e RJ-45 cable into the sealing gland base and connect
it to the RJ-45 connector at the bottom of the ODU, labeled. Make
sure that the connector is completely inserted and tightened.
((Suggest to use Cat 5E 4x2x24# F/STP outdoor Shielded Patch Cable))
((The total length of the Ethernet cables from the ODU to the IDU’s RJ-45
(WAN) PoE port. Must not exceed 100m))
2.
Connect the cable
•
Remove the sealing cable gland plug from the gland nut.
•
Open the sealing gland nut and remove it. Don not disassembles
