Gemtek WL-379 F, Руководство пользователя

Страница: 33 / 40

Wireless LAN
User's manual 11Mbps Wireless LAN CF Card 33
- Mode
This field allows you to select from a list of supported Network “Modes”. The modes displayed will
have two values: “802.11Ad Hoc” and “Infrastructure”.
802.11 Ad Hoc - This is the 802.11 peer-to-peer mode of operation. In 802.11Ad Hoc only one
wireless “cell” is supported for each different SSID. All communication is done from Client to Client
without the use of an Access Point. 802.11 Ad Hoc networking uses the same SSID for
establishing the wireless connection.
Infrastructure - This mode of operation requires the presence of an 802.11 Access Point. All
communication is done via the Access Point , which relays packets to other wireless Clients in
the BSS as well as to nodes on a wired network such as Ethernet.
TX Rate – The transmission rate at which client of AP transmits the data packets. You may set this
to fixed 1Mbps, fixed 2 Mbps, fixed 5.5 Mbps or 11 Mbps.
PS Mode - Power saving mode.