6
3 Configuring the Wireless Ethernet Client
The Wireless Ethernet Client is a ready-to-use device. It is delivered with default
settings that allow you to have access to it without configuring it. When this
message window pops up, press OK to access web configuration page. No user
name and password needed.
You can configure the Wireless Ethernet Client via
a JavaScript-enabled
web-browser such as Internet Explorer 4.0 or higher, or Netscape Navigator 4.0 or
higher.
Factory Default Settings for the Wireless Ethernet Client
SSID
default
Channel 6
Transmission rates
Auto
WEP enable
No
IP Address mode
Static
IP Address
192.168.5.99
Subnet mask
255.255.0.0
User Name
Blank
Administrator or password
Blank (no password needed)
The computer that you are using for initial configuration must have an IP Address
within the same range as the IP Address of the Wireless Ethernet Client.
The Wireless Ethernet Client has a default IP Address of 192.168.5.99 with
a subnet mask of 255.255.0.0
