User’s Guide
Chapter 7 – Reference Manual
To edit or change the administrator settings simply click the
edit
button:
Figure 108 – Change Administrator Settings
Username
– administrator username for access to Access Controller (e.g. web interface, CLI mode)
[1-32 symbols, spaces not allowed].
Idle
Timeout
– amount of administrator inactivity time, before automatically disconnecting
administrator from the web interface [300-3600 seconds]. The default idle time: 10minutes (600
seconds).
Old Password
– old password value.
New Password
–new password value used for user authentication in the system [4-32 symbols,
spaces not allowed].
Confirm Password
– re-enter the new password to verify its accuracy.
Save
– click to save new administrator settings.
User Interface | Start Page
The
start page
is the default web page where users will be redirected after log-on. This value will be
overwritten by the WISP RADIUS attribute no.4 "Redirection-URL" if provided in the authentication
response message. Use the
user interface | start page
menu to view or change the start page URL:
Figure 109 – Start Page
The administrator can change the
start page
by clicking the
edit
button. The value entry field will
change into an editable field:
Figure 110 – Edit Start Page
Value
– enter new redirection URL of start page in valid format [http://www.startpageurl.com].
Save
– to save new settings.
Cancel
– restores all previous values.
User Interface | Walled Garden
The
walled
garden
is an environment that controls the user's access to Web content and services.
This feature gives the ability to define a free, restricted service set for a user not yet logged into the
system. Use the
user interface | walled garden
menu to view or change the free URLs or hosts:
Gemtek Systems
Page 87
