Gemini ZRX-S15P, Руководство пользователя, Страница: 2 / 4

ZRX-S15P
SUBWOOFER 2
1. INTRODUCTION
Thanks for choosing our ZRX-S15P Subwoofer. This
product has been designed to deliver industry leading
performance and outstanding value. The ZRX-S15P is
easy to transport and deploy, and is the perfect solu-
tion in a wide variety of roles – from small auditoriums
to large outdoor events.
2. SAFETY INTRODUCTION
(Please read before use)
(1) Electronic appliance safety
• Keep this device away from fire, rain and moisture to
prevent risk of fire and shock hazard!
• Do not attempt to service this product yourself,
as opening or removing covers may expose you to
dangerous voltage or other risks. Refer all servicing
to qualified service personnel. Most damages are the
result of incorrect operation!
• Use only the supplied power supply or power cord.
The power supply cord should be unplugged when
the unit is to be unused for long periods of time.
Periodically check cords for cuts or signs of stress,
especially at the plug and the point where cords exits
the unit.
• Before replacing the fuse, unplug mains power. Only
replace fuses of the same rating and power as speci-
fied on the rear panel.
• Clean only with dry and soft cloth.
(2) Installation safety
• Before installation, make sure that the installation
area can hold a minimum weight of 5 times of the
system’s weight. (For product weight please refer to
its spec sheet.)
• The unit should stand only on a clean, solid, vibra-
tion-free and fire-resistant surface. Do not place the
unit on an unsteady trolley or stand.
• Any ventilation openings must never be blocked or
covered. The unit must be positioned at least 20cm
away from walls.
• Make sure all signal cables and power cables are well
secured and dressed to prevent safety hazards for
people walking by.
(3) Health Hazard
• High loudspeaker levels can cause permanent hear-
ing damage. Wear hearing protection if continuously
exposed to high SPL audio.
3. FUNCTIONAL SPECIFICATION
1 – Input:
Balanced combo input (XLR/6.3 mm jack) for getting
signals from mixers or preamplifiers.
2 – THRU Output:
Balanced XLR connectors connected in parallel to the
inputs to connect another device
(e.g. another active speaker system).
3 – Volume:
Volume Control.
4 – Phase Switch:
Allows user to reverse phase 180°.
5 – DSP presets:
Live / Monitor / DJ
6 – Power Indicator:
When the power switch of this speaker is turned on,
this indicator will light.
7 – Limit Indicator:
This LED indicates that the input signal is too loud,
and may distort the sound or damage the unit.
8 – High Pass:
Cut off frequency from 0
~
120Hz.
9 – Prog Only:
Enter Program mode (Factory use only)
10 – DSP:
USB connector to adjust (Future use)
11 – Power Supply Voltage Switch:
Select between 115V or 230V AC mains power.
12 – AC Input:
Please Use AC input cable from the original manufac-
turer only.
13 – Power Switch:
Turns unit on or off.