MANUAL SETUP OF TRANSMITTER FREQUENCY
You can set up transmitter frequency manually also.
1. Press and hold the “SELECT” button until
GROUP and CHANNEL displays begin to
alternate.
2. To change the group setting, release the
“SELECT” button while GROUP is displayed.
While GROUP is flashing, press “SELECT”
button to increase the group number by one.
3. To change the channel setting, release the
“SELECT” button while CHANNEL is displayed.
While CHANNEL is flashing, press “SELECT”
button to increase the channel number by one.
RECEIVER
Frequency Range: USA : 682~694.75MHz
Frequency Stability
：
10ppm
Sensitivity: 13dBuV
Adjacent channel rejection
：
75dB
Image rejection: 95dB
Audio Output
：
200MV
Output Impedance: XLR connector: 200 ; 1 / 4 inch connector: 1k
S/N ratio: 100dB
0.1%
Frequency response: 50Hz-15KHz
:100m( in line and sight area)
Power supply: DC12V/500mA
TRANSMITTER
Frequency Range: USA : 682~694.75MHz
Frequency Stability: 10ppm
Transmitting power: 10mW
Spurious emission: >65dB
Modulation: FM
Max modulation: 75K
Power supply: 3V (2 AA batteries)
Current consumption: 120mA
Total Harmonic Distortion: <
Operating Range
SPECIFICATIONS
-5-
