background image

 

 

5

 

 
 

1.  Do  not  remove  the  SD  memory  card  while  power  is  on.  It  causes  recording  file  missing  and  device 
malfunction. 
2. Do not touch or hold SD memory card with wet hand or oily hand. It may cause malfunction due to SD 
memory card damage. 
3. Do not put a foreign substance into the SD memory card slot of a device. It may cause malfunction or SD 
memory card insert problem. 
4.  When  power  is  supplied  by  the  cigar  lighter,  watch  the  poor  connection  in  a  socket.  Poor  connection 
causes data loss and SD memory card damage. 
5.  Do  not  clean  the  device  with  water,  benzene  or  alcohol.  Wipe  the  device  with  soft  and  dry  cloth. 
Otherwise, it may cause device damage. 
6. Do not shock a device. The shock to the device might cause damage or malfunction of the device. 
7. If the device is required to re-install, adjust the camera angle again. Play the recording file and re-adjust 
the angle if the camera captures viewing angle wrongly. 
8. When a car accident happens, turn the power off and wait until indication LED light is off. Then, remove 
the SD memory card from the slot. As the recording file can be over written, in case the recording file is not 
saved in an Event Folder, the SD memory card has to be removed from the device and kept separately. 
9. Use a recommended authentic SD memory card. Not using authentic SD memory card might cause data 
loss.   
10.  Do  not  remove  the  SD  memory  card  or  turn  the  power  off  while  SD  memory  data  is  deleted  or 
formatted. 
11.  Play  the  recording  file  regularly  to  see  the  video  is  correctly  recorded.  And  format  SD  memory  card 
regularly to avoid SD memory card error. 
12. While continuous recording, with the battery protection function, the device may stop working earlier as 

per  battery  status  influenced  by  personally  installed  accessories.  Battery  protection  function  is  built-in  to 
avoid  battery  discharge.  But  careful  watch  is  essential  with  continuous  recording  as  the  battery  can  be 
discharged fast as per seasonal condition and battery using period. 

13. Detecting GPS  signal may take time from few  seconds  to few minutes as per weather and geography 

condition. 

14.  In  a  very  dark  condition  and  under  no  light,  the  recorded  video  quality  would  lower  than  daytime 
recording. 
15. Dark tinting film on windshield causes bad video recording quality. 
16. Metallic tinting on windshield may cause radio block. It causes GPS signal receipt problem. 
17. G-shock sensor for event recording is built-in. But if the shock is weak, event recording file may not be 

created.   

18. Power failure from the vehicle due to big accident or shock might cause data loss.   
19. Light reflection by GPS screen and indoor lighting might cause after image at night recording. 
 
 
 
 

 

  Caution 

Содержание NCB-D200-IR






















Отзывы: