Gemini GSO17G1, Руководство пользователя

Страница: 7 / 24

7
Important Note: After each operation, user must clean the water in the drip
tray and put back to the appliance for next use.
OPERATION INSTRUCTIONS
BEFORE FIRST USE
Power On:
Plug into the power source to hear the “beep” sound,and press and hold the “Power”
button for 2 seconds to switch on the appliance, the “STEAM” function icon will
keep flashing.
Function selection:
Rotate the “Function knob” to select the “STEAM”, “BAKE”, “STEAM+BAKE”,
“DEFROST”, “WARM” or “FERMENTATION” functions. Press the “Function knob”
once to confirm one of the function and enter into the food menu for further selection.
The appliance has default the required cooking temperature and running time for all
functons. (Except the DIY Cooking mode in “STEAM”, “BAKE” and “STEAM+BAKE”
functions) Please refer to “Function menu Temperature and Running time” section
on page 6 for details.
Press “Start” button after selected the food menu / DIY setting. Then the
appliance will start cooking.
1. 360 ˚ Hot Steam Convection
2. Makes the air to cycle in the cavity, quickly circulation.
3. It produces more even heat all over the food by air.
4. Convection Hot Steam provides faster cooking in many cases than regular radiant
types of oven and gives food a more crispy and golden colour on the surface.
• Read all of the instruction included in this manual.
• Make sure that the appliance is unplugged.
• Remove any packaging material and promotional labels before using the
appliance for the first time. Wash the Grill Rack & Grill Plate in warm soap water
before first use. Thoroughly dry, then assemble. Position the appliance on a firm
level table or bench. There is always 50cm distance from top side and 10cm
distance from left, right and back side of the appliance and the surroundings.
The steam nozzle must not be covered or blocked when use.
NOTE: You may notice a slight odour from the main unit on first use. This is
normal and expected for the first operation.
After re–assembling the appliance, we recommend that you run it at the highest
temperature (230˚C) with “BAKE” function DIY mode for approximately 15 minutes
to eliminate any packing residue that may remain after shipping. This will also
remove all traces of odor initially present.
Standby mode: connect the power, press “Power / Start / Pause” Button to
standby mode.