manualshive.com logo in svg

Gemini Gemini GEM-RP3DGTL, Руководство по эксплуатации

Поделиться
Скачать
Gemini Gemini GEM-RP3DGTL Скачать руководство пользователя страница 24

24

P R O G R A M M I N G   ( O P T I O N A L )

Introduction

The Program Mode (optional) is used

to customize User Codes. Access to the
Program Mode requires a special User
Code, therefore not all users may have the
ability to program.

Note:

• 

If the system contains more than

one keypad, only the keypad desig-
nated “No. 1” may be used for pro-
gramming (if in doubt which is No. 1,
ask your installer).

• 

Operation of the keypad buttons in

the Program Mode is different from
that for normal operation. Refer to
the accompanying diagram for key-
pad functions in the Program Mode.

• 

If the selected function requires

more than one screen, scroll the dis-
play using the 

A

 button.

• 

While in the Program Mode, the

ARMED and STATUS lights remain
off and burglar and fire alarm func-

tions are disabled.

• 

If the keypad detects no activity in

the Program Mode for more than 4
minutes, a tone will sound; to silence
the tone, press the 

G

 button.

• 

The programmed code or descrip-

tion will not be permanently stored

until you press the 

J

button.

• 

To exit the Program Mode, press

the 

C

 button.

Programming User Codes

Do not attempt to program a code

containing any blank spaces between dig-
its. In selecting your codes, do not pro-
gram repetitive numbers (1111), consec-
utive numbers (1234), your birth date,
address, or other obvious combinations.
Choose a code of up to six digits (a
minimum of four is recommended, and
required in UL installations).

The User Program Mode is accessed

from the Function Mode as follows:

1. Enter your code, then press the

A

 button to enter the Function Mode.

2. Answer NO (press the 

F

 button)

until “17” (Activate Program) is displayed,
then press the YES (

E

) button.

Note:

 If you pass “17”, press the 

B

button to scroll back.

3. The display will scroll the following:

“P” (Program mode); 4 digits identifying
software versions; then “UP” (User Pro-
gram). The keypad will continue to flash
while programming user codes.

4. Set the cursor to the user number

with the the 

A

 button.

5. Using the number buttons, enter a

User Number as a two-digit number (enter
1-9 as “01”-“09”).

GEM-RP3DGTL.pub 
page 24

Wednesday, August 18, 1999 14:03 

Содержание Gemini GEM-RP3DGTL

































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды