Gemini CDX-02 Скачать руководство пользователя

Страница: 4 / 12

INTRODUCTION:

Congratulations on purchasing the

Gemini CDX-02 Professional Dual

CD Player

. This state of the art professional CD player is backed by a

three year warranty, excluding lasers. One year warranty on CD lasers.
Prior to use, we suggest that you carefully read all the instructions.

FEATURES:

Large blue backlit LCD display

Three-way time selection

Single/auto-continuous play modes

Beat per minute counter tap button

Precise rubber jog wheels with finger grips

Pitch bend with jog wheel or buttons

Stutter play for accurate cue point selection

Instant-start & cue with preview

Fast track & song searching

CD-R compatible

SAFETY CERTIFICATIONS:

Laser Diode Properties

Material: Ga - Al - As

Wavelength: 755 - 815 nm (25° C)

Laser Output: Continuous Wave, max. 0.5mW

CAUTIONS:

1. Do not use this CD Player at temperatures below

41°F/5°C

or higher

than

95°F/35°C

2. The apparatus should not be exposed to dripping or splashing and no
objects filled with liquids such as vases should be placed on the appara-
tus. Place the unit in a clean and dry location.

3. Do not place the unit in an unstable location.

4. When disconnecting the power cord from an AC outlet, always grasp it
by the plug. Never pull the power cord.

5. To prevent electric shock, do not remove the cover or the bottom
screws.

There are no user serviceable parts inside.

Please refer servicing to

a qualified technician.

7. Do not use chemical solvents to clean the unit.

8. Keep the laser pickup clean by keeping the drawer closed.

9. Keep this manual in a safe place for future reference.

IMPORTANT NOTE:

Since the

CDX-02

is a dual CD player, most of the functions and controls

are duplicated on both sides of the CD player. To eliminate confusion and
to make the drawings easier to understand, we will only number the left
side functions and controls.

When using CD-R formatted music, be advised not to record at more than
8x speed.

LINE VOLTAGE SELECTION:

Model

CDX-02

is a dual voltage unit. It will operate at

115

230

volts. To

set the proper voltage, follow these steps:

1. Place the head of a screwdriver in the center of the

VOLTAGE SELEC-

TOR SWITCH

(1) found on the rear panel.

2. Slide the switch to

115

230

volts.

3. Do not force or twist the switch. Excessive force may cause damage.
If the switch does not move smoothly, contact a qualified technician.

CONNECTIONS:

1. Connect the power plug into the

AC IN

(2).

2. Using the included cable, plug one end into the rear of the

CONTROL

UNIT

(3) and the other end into the

MAIN UNIT

(3).

3. Plug one end of a set of the included RCA cable connectors into each
of the

LINE OUTPUT JACKS

(4).

4. Plug the other end of the RCA connectors into any available line level
input jacks on your mixer. If you are connecting the

CDX-02

through a

receiver, you can plug the

RCA

connectors into the

AUX INPUT

JACKS

on your receiver. If there are no

AUX INPUTS,

use any line

level (not phono) inputs.

FUNCTION DESCRIPTIONS:

POWER:

After making sure that the

VOLTAGE SELECTOR

(1)

switch, found on the rear panel, is properly set, plug the unit in and press
the

POWER

(5) button. The unit will turn on. Pushing the

POWER

button

(5) a second time will turn the unit off.

DISC TRAY:

The

DISC TRAY

(7) is where the CD is held during loading,

unloading and playback. Pressing the

OPEN/CLOSE

(6 & 8) button, will

open or close the tray. The

DISC TRAY

(7) holds both 12 cm and 8 cm

CDs. Please note, if the

CDX-02

is in play mode, the tray will not open.

Note: Do not force the DISC tray to close, excessive force will damage the CD mecha

nism, use the open/close (8) buttons only.

OPEN/CLOSE BUTTON:

Press

OPEN/CLOSE

(6 & 8) to load or

remove a CD from the

DISC TRAY

L.C.D.:

The

LIQUID CRYSTAL DISPLAY

(12) shows the track number,

pitch value, single-auto cue, continue (for continuous play), and 4 different
time displays. These time displays are time elapsed on the track, time
remaining on the disc, the last 30 second outro of the track, and time
remaining on the track. Time is measured in minutes, seconds and frames.

PLAYBACK DISPLAY BAR:

The

PLAYBACK DISPLAY BAR

(13) dis-

plays the elapsed and remaining time for each track. The display flashes
slowly when the track has 30 seconds remaining and pulses rapidly when
playing time is down to 15 seconds.

PLAY/PAUSE:

Each press of the

PLAY/PAUSE BUTTON

(10)

causes the operation to change from play to pause or from pause back to
play.

CUE:

With the unit in the

PLAY

mode (

PLAY/PAUSE LED

is green) and

after the cue point has been programmed, pressing

CUE

(11) will immedi-

ately pause the track at the programmed

CUE

point (the

CUE LED

glows

blue). In

PAUSE

mode(

PLAY/PAUSE LED

blinks), holding down

CUE

(11)

changes the function to preview and starts the CD from the programmed
cue point. Releasing the

CUE

(11) button will return the CD laser to the

preset cue point in

PAUSE

mode.

BPM:

Tapping the

BPM

(23) button allows you to count the beats per

minute on a track. Holding the

BPM

(23) switches display modes from

BPM

PITCH,

which is indicated on the right side of the

LCD

(12).

TRACK SKIP:

The

TRACK SKIP

(14) buttons let you select the

track to play.

+10:

The

+10

(15) button lets you quickly scan through track numbers in

increments of ten.

SEARCH JOG WHEEL:

Use the

SEARCH JOG WHEEL

(9) to select the

scanning direction and speed of your CD. Turning the wheel in a clockwise
direction scans forward while a counter-clockwise turn scans the track in
reverse. Scan speed increases as the wheel is turned.

SEARCH DIAL:

The

SEARCH DIAL

(9) has two functions. Use the

SEARCH DIAL

(9) to make fine adjustments in pause mode. Use the

SEARCH DIAL

(9) to bend the pitch for precise synchronization in play

mode.

SEARCH:

The

SEARCH

(16) buttons are used to move forward

or reverse while in play or pause mode,

SEARCH

(16) can also be used

to find a

CUE POINT

. Hold down either button for ultra fast searching.

STOP :

The

STOP

(18) button ends CD play.

SINGLE:

Pressing the

SINGLE

(19) activates the

AUTO CUE

function.

The

AUTO CUE

function causes the unit to pause at the beginning of

music of the following track and allows you to start play immediately from
the start of music without any blank space (which exists at the beginning
of every track). Pressing the

SINGLE

(19) button a second time activates

the

CONTINUOUS

function causing the unit to play continuously (after the

last track, the unit will return to the first track of the disc and continue to
play). Pressing the

SINGLE

(19) button a third time deactivates the

CON-

TINUOUS

function.

(4)