Gemalto Cinterion ENS22-E Скачать руководство пользователя страница 96

Страница: 96 / 189

Cinterion

ENS22-E AT Command Set

7.1 AT^SICS



ENS22-E_ATC_V01.000

19/02/11

Page 96 of 189

Parameter Description

0...4

Internet connection profile identifier.

The

identifies all parameters of a connection profile, and,

when a service profile is created with

AT^SISS

the

needs

to be set as "conId" value of the

AT^SISS

parameter

Internet connection parameter.
“conType“

Type of Internet connection.

For supported values of

refer to

<conParmValue-con-

Type>

“alphabet“

Selects the character set for input and output of string parameters within a pro-

file.

The selected value is bound to the specific profile. This means that different

profiles may use different alphabets.

It is recommended that "alphabet" should be set after

<conParmValue-con-

Type>

and before other parameters.

For supported values of

refer to

<conParmValue-

alphabet>

“user“

User name string: maximum 31 characters (where "" is default).

“passwd“

Password string: maximum 31 characters (where ***** is default).

“apn“

Access point name (APN) string value: maximum 63 characters (where "" is

default).

Parameter value; type and supported content depend on related

Supported connection type values in

for

value "conType".

“GPRS0“

Packet switched connection type IPv4.

“GPRS6“

Packet switched connection type IPv6.

“none“

Clears the connection profile.

Supported string parameter character set selections in

for

value "alphabet".

[“0“]

Applicable character set is determined by current setting of

AT+CSCS

“1“

International Reference Alphabet (IRA, seven bit ASCII).

Note

• After entering

AT^SISO

Cinterion

ENS22-E automatically tries to find and attach to an existed Packet

Domain with

same

<conParmValue-conType>

and APN, if not found,

Cinterion

ENS22-E automatically

tries to define and acti-vate a new Packet Domain with

<conParmValue-conType>

and APN. After

entering

AT^SISC

, the auto-matically defined Packet Domain will be deleted if no opening serevice is based

on it. Yet, the only exception

AT+CGATT

which can be used any time to detach from the Packet Domain

and thus disconnect the bearer

opened with

AT^SISO

(num)

(str)

(str)(+CSCS)

<conParmValue-conType>

(str)(+CSCS)

<conParmValue-alphabet>

(str)(+CSCS)

Содержание Cinterion ENS22-E






























































































































































































Результаты поиска

Содержание Cinterion ENS22-E

Отзывы:

Бренды по названию

Популярные бренды

Gemalto Cinterion ENS22-E, Набор команд AT

Результаты поиска

Содержание Cinterion ENS22-E

Отзывы:

Бренды по названию

Популярные бренды