Gemalto CINTERION DSB-Mini, Руководство пользователя

Страница: 7 / 30

DSB-Mini User Guide
1 Introduction
23
c
dsb-mini_ug_v02 Page 7 of 30 2012-10-09
Confidential / Released
1 Introduction
The DSB-Mini is a simple and easy-to-use development support board, designed to assist sys-
tem integrators in developing and evaluating products based on Cinterion Wireless Modules.
This document describes all interfaces of the DSB-Mini, provides technical specifications and
presents guidelines for connecting and operating the Cinterion modules to be evaluated.
Chapter 2 introduces the product concept, including key features and system overview, Chap-
ter 3 describes the DSB-Mini’s interfaces in some more detail including the DSB-Mini’s connec-
tor pin assignments. The Appendix finally contains schematics and placement (see Chapter 4 ).
1.1 Regulatory Compliance Information
The DSB-Mini is intended for use only in a laboratory test environment. All persons handling
the DSB-Mini must be properly trained in electronics and observe good engineering practice
standards.
The DSB-Mini is a test/development platform and has not been designed to be embedded into
other products (referred as "final products").
The DSB-Mini is not intended for use as reference environment for type approval.
1.2 Supported Products
The DSB-Mini provides two 40-pin connectors to mount the Cinterion Starter Kits B60 and B80
in order to evaluate the full functionality of modules that can be connected to these Starter Kits.
Also, the DSB-Mini has an 80-pin connector to mount the Cinterion Multi-Adapter R1 or various
other DSB75 product adapter together with their plugged modules. Signals and levels are in
each case switched automatically.
The diversity of the supported products implies that, due to hardware or software specific prop-
erties, major differences occur regarding the availability of interfaces and the implementation
of features. Therefore, please consult the specifications supplied with your module, especially
[1] and [2] , to make sure whether or not a described interface, signal, operating mode or func-
tion offered by the DSB75 is supported.
1.3 Related Documents
[1] AT Command Set for the appropriate module
[2] Hardware Interface Description for the appropriate module
[3] DSB75 Development Support Board Rev. B1 Hardware Description
[4] Starter Kit B60 User Guide
[5] Starter Kit B80 User Guide