Rev. 00 02/17
HFF01
Start-up
•
15
Start-up
Start-up
ATTENTION
Cross-contamination
For technical reasons, the fluid plate consists of porous material
and is therefore able to capture residual amounts of powder
particles.
►
Always use the fluid plate corresponding with the processable
powder and end product!
Cleaning the interior of the powder hopper
The interior of the powder hopper must be hygienically clean before start-
up.
1.
Cleaning the interior of the powder hopper. Refer to chapter on
"Cleaning the interior of the powder hopper" on page 25.
– The interior of the powder hopper is hygienically clean.
Filling the powder hopper with powder
1.
Place the powder hopper onto the portable frame or the ground
CAUTION
May cause foot injury!
Toes in the vicinity of the hopper and the frame/ground may be
squashed when placing the powder hopper onto the portable frame
or the ground.
►
Wear steel-capped safety boots.
2.
Set the ventilation (Airmover)
– Open the ball valve completely
– use the throttle valve to adjust
3.
Inserting the powder
– Open the filler cap of the powder hopper.
– Insert the powder
Only fill the powder up to the half mark of the powder hopper to
prevent fluidizing powder escaping from the lid.
Содержание HFF01
