V
12/13
4
•
General safety regulations
OptiFlex A1 (AS07)
3. Observance of the operating, service and maintenance
instructions specified by the manufacturer is also part of
conformity of use. The OptiFlex A1 (AS07) should only be used,
maintained and started up by trained personnel, who are
informed about and are familiar with the possible hazards
involved.
4. Start-up (i.e. the execution of a particular operation) is forbidden
until it has been established that the OptiFlex A1 (AS07) has
been set up and wired according to the guidelines for machinery
(2006/42 EG). EN 60204-1 (machine safety) must also be
observed.
5. Unauthorized modifications to the OptiFlex A1 (AS07) exempt
the manufacturer from any liability from resulting damage.
6. The relevant accident prevention regulations, as well as other
generally recognized safety regulations, occupational health and
structural regulations are to be observed.
7. Furthermore,
the
country-specific safety regulations also must be
observed.
Explosion protection
Protection
type
Temperature class
II 3D
IP54
T6 (zone 21)
T4 (zone 22)
Product-specific safety measures
-
Installation work performed by the customer must be carried
out according to local regulations.
-
Before starting up the plant a check must be made that no
foreign objects are in the booth or in the ducting (input and
exhaust air)
-
All components must be grounded according to the local
regulations before start-up.
OptiFlex A1 Control system
The OptiFlex A1 (AS07) control system is a constituent part of the
equipment and is therefore integrated in the system's safety concept.
If it is to be used in a manner outside the scope of the safety concept,
then corresponding measures must be taken.
NOTE:
For further information, see the more detailed Gema safety
regulations!
