Page9
owners manual
Prp700-Prp800
SONG PLAYER/REC: recording a song
This section allows you to easily record and playback your performances using the digital piano presets
Press the RECORD button to prepare recording.
The STOP/PAUSE, TRACK1 and REC buttons led
will begin to fl ash. The instrument is now ready
to start recording on track num.1. At this point
you can select any of the piano sound preset
and play.
Press the PLAY button to start recording.
The display shows the bar numbers, while the
dots start blinking as a reference guide.
The recorder will record all of the events includ-
ing playing the actual keys on the keyboard, the
pedals, and changing the presets. Press the button
STOP to stop recording. Then press PLAY to listen
to your recording.
Recording the Track 2
Once you have recorded the track number 1 using any of the piano's presets, it is possible to select
another preset on track number 2. This is ideal for left & right hand piano practice.
Once you have recorded on track 1, press the
RECORD button again.
The track 2 button led fl ashes notifying the "ready
to record" status of the track.
The track 1 led is on, advising that the track is
already recorded.
Press the PLAY button to start recording the second
track. During the recording you will hear the part
already recorded on track 1
Press the button STOP to stop recording.
Current
beat num-
ber
Next press the PLAY button, to listen to the play-
back of both tracks.
the led stops
fl ashing
During the playback, each track can be enabled
or disabled by simply pressing the corresponding
track button.
Track PLAY Ena-
bled : led ON
Track PLAY Disa-
bled : led OFF
Playback mode
Once a track is already recorded in the sequencer, two Play/Stop modes are possible.
Song PLAY
Press STOP once , the button
led will begin to start fl ashing
Now press PLAY, the playback will begin from
the same point where the song was stopped
(Continue mode)
Led ON
Song PLAY
Press STOP twice, the button
led goes OFF
Now press PLAY, the playback starts from the
begin of the song (Go to Start mode).
1
2