L-GL600-AL Bracket
Out-swing narrow frame doors
Copyright © Gianni Industries, Inc. All rights reserved.
DM-CA-L-GL600-AL Ver. D Published on 2011.09.08
Unit:mm
Application for the Electromagnet: GL600-S
1
4
2
5
3
6
16mm
8mm
Hollow Metal Door
6.8mm for M8-1.25 thread
Reinforced Door
12.7mm
8mm
Solid Door
36mm
Power
Power
Finish
"L" brackets
40
50
.5
43
44
20
3
20
3
Installation of L bracket on Out-swing Doors
A s s e m b l e t h e
e l e c t r o m a g n e t a n d L
b r a c k e t w i t h a n A l l e n
wrench.
Turn on the power of
electromagnet. Let the
electromagnet and the
a r m a t u r e p l a t e b o n d
together. Press L bracket
against the door frame.
Fasten L bracket on the
door frame.
Test the unit. Tap the
p l u g s i n t o t h e
electromagnet
Drill a hole 8 mm in
diameter through the
d o o r. E n l a r g e t h e
hole to 16 mm from
outside.
Drill a hole 6.8 mm in
d i a m e t e r f r o m
inside. Screw with a
M8-1.25 thread.
F o l d t h e m o u n t i n g
template 90° angle along
the dotted line.
Drill a hole 8 mm in
diameter through the
d o o r. E n l a r g e t h e
hole to 12.7 mm from
o u t s i d e . T h e
thickness of the door
is 36 mm.
Drill the holes marked on
the template.
GIANNI INDUSTRIES, INC.
Magnet
A
rm
a
tu
re
Door Frame
Door
Leaf
A
Out-swing
L-bracket for narrow door frames
When
< 60 mm ,must installed with "L" brackets.
"A"
No. 13, Zhongxing Rd., Tucheng Dist., New Taipei
City 236,Taiwan (R.O.C.)
Tel: 886-2 2267 7986 / Fax: 886-2 2267 9876
E-Mail: [email protected]
Website: gianni.tw
