background image

G X 7 0 0  

I n s t r u c t I o n   m a n ua l  

 

1 5

ENVIRONMENTAL

 

temperature range:  - 10°c to + 55°c.

 

Vibration:  mIl stD 810E, procedure I 3.4.8.

 

solar radiation:  case uV stabilised. 

 

Water and Dust resistance:  IPX7* excluding external cabling.

 

compass safe Distance:  300 mm.

EXTERNAL CONNECTIONS

 

microphone:  6 pin socket.

 

Dc supply:  2 pin socket.

 

External speaker:  3.5 mm phono line socket.

*specifications are typical unless otherwise indicated and may be subject to change without 
notice or obligation.

stAnDARD CoMMUnICAtIons WARRAntY AGAInst DeFeCts

 

this warranty against defects is given by standard communications Pty ltd acn 000 346 814  
(We, us, our or GmE). our contact details are set out in clause 2.7. this warranty statement only applies 
to products purchased in australia. Please contact your local GmE distributor for products sold outside of 
australia. local distributor details at: www.gme.net.au/export.

1. Consumer guarantees

1.1  our goods come with guarantees that cannot be excluded under the australian consumer law. You are 

entitled to a replacement or refund for a major failure and for compensation for any other reasonably 
foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods 
fail to be of acceptable quality and the failure does not amount to a major failure.

1.2  to the extent we are able, we exclude all other conditions, warranties and obligations which would 

otherwise be implied.

2. Warranty against defects

2.1  this warranty is in addition to and does not limit, exclude or restrict your rights under the competition 

and consumer act 2010 (australia) or any other mandatory protection laws that may apply.

2.2  We warrant our goods to be free from defects in materials and workmanship for the warranty period 

(see warranty table) from the date of original sale (or another period we agree to in writing). subject 
to our obligations under clause 1.2, we will at our option, either repair or replace goods which we are 
satisfied are defective. We warrant any replacement parts for the remainder of the period of warranty for 
the goods into which they are incorporated.

2.3  to the extent permitted by law, our sole liability for breach of a condition, warranty or other obligation 

implied by law is limited. 

 

(a)  In the case of goods we supply, to any one of the following as we decide – 

 

  (i)  the replacement of the goods or the supply of equivalent goods.

 

  (ii) the repair of the goods.

 

  (iii)  the cost of repairing the goods or of acquiring equivalent goods. 

 

(b)  In the case of services we supply, to any one of the following as we decide – 

 

  (i) the supplying of the services again 

 

  (ii)  the cost of having the services supplied again.

2.4  For repairs outside the warranty period, we warrant our repairs to be free from defects in materials and 

workmanship for three months from the date of the original repair. We agree to re-repair or replace (at 
our option) any materials or workmanship which we are satisfied are defective. 

Содержание GX700



















Отзывы: