GEM GK 340, Руководство пользователя

Страница: 18 / 24

14 GK340 Owner’s manual
1
2
3
4
5
Digital Effects
The GK340 contains a Digital multi-effects processor which
adds realism to your playing.
The Digital Signal Processor (DSP) consists of one unit which
process the Performances with Reverb and Chorus effects.
The buttons which control the Digital Effect are DSP button.
The DSP indicators
When the DSP display indicators are on, all the voices of the
current Performance will play with their programmed effects.
When one or both the corresponding display indicators are
off, the sounds will play “dry” (without effects).
The Memory buttons and Store Memory
You have seen that the Single Touch Play settings recall factory-set
configurations for the current Style when the [S.T. PLAY] button is on.
You have also seen that, when S.T.PLAY is off, (display
indicator off), the 6 buttons of the PERFORMANCE section
recall factory-set panel configurations (see page 5), includ-
ing Voices, Volumes, Style, Variation, Split Point, etc..
How to Store a Memory
If you don’t want to use the factory Performance settings, you can
memorize your own panel configurations to the PERFORMANCE
buttons. This very useful feature allows you to store up to 6 pre-
ferred panel configurations, including Style, Variation and other se-
lections, which you can then recall at the touch of a single button.
To memorize a Performance, the first thing to do is to modify one of
the factory set situations. For example, if you select STYLE number
45 (Swing) with Single Touch Play on, the voices recalled for the
Upper and Lower sections will be Organ 2 and Strings respectively.
You only need to change one aspect of any factory setting to
be able to save the new setting as a new Performance. In our
example, let’s change the voice assigned to the Voice 1 section.
1. Press the
[VOICE/SONG/STYLE] button, press the
[S.T.PLAY] button, then select Style n. 45 (Swing).
2. Press the [VOICE/SONG/STYLE] button and select a
different Voice by using either the [+] and [–] buttons, or
the numeric keypad (voice 27, Jazz Guitar, for this example).
3. Deactivate the Single Touch Play function (press the
[S.T.PLAY] ).
4. Hold down the [STORE] button and simultaneously press
one of the PERFORMANCE buttons [M1] - [M6] . For
example, if you press [M5] :
The small black arrowhead at the bottom of the display
will show the current Performance.
Whatever information was previously stored in the selected
button will be erased by the new data.
5. At this point, you can check if your new Performance has
been stored. Changing the panel situation (for example,
select a Voice or Style), then press the MEMORY button that
you used to store your Performance in point 4 above.