GEM genesys s, Руководство пользователя

Страница: 21 / 32

/, -*"-
A
midifi le edit upgrade Page17
release notes Genesys series
MIDIFILE TRANSPOSE
It is possible now realtime transpose the entire selected or played midifi le, by simply pressing the TRANS-
POSE #/
b
buttons on the panel. Each time you press the [#] button the general pitch of the midifi le will
be increased of a semitone, each time you press the [
b
] button the general pitch of the midifi le will be
decreased of a semitone, a global range of +/- 24 semitones is allowed. To restore the original pitch it’s
enough to press the two TRANSPOSE buttons contemporarily.
The semitone TRANSPOSE
value is shows in the display.
MIDIFILE MIXING PARAMETERS: VOLUME
Press the MIXER button on SECTION EDIT area to access the VOLUME set up page. As well as the function
button [F1] will recall the VOLUME page in case a different parameter has been previuosly selected.
The main screen visualize the tracks assigned to the current Preset (from 17 to 24). Press the button PART
on the panel to select the midifi le tracks from 9 to 16
Track selection
The main screen visualize the Midi tracks from 9 to 16, it is possible to select each of them using the rela-
tive function buttons from [A] to [H], as the same way can be also used the UP/DOWN CURSOR. Pressing
the PART button again, the track from 1 to 8 will be visualized in the display.
Once a track is selected the VOLUME value can be modifi ed by rotating the DIAL. The operation can be
repeated as many time as you need.
In this condition of edit-
ing the TRANSPOSE re-
ally modify the MIDI note
events value contained in
the midifi le.