___________________________________________________________________________________________________________________________
Rev.1
Date 17.06.2013
Page 4 / 14
INTRODUCTION
First of all, we would like to thank You sincerely for choosing this GEM AUDIO LABS
Sculptor
which combines ease of operation with support for multiple usage environments. As
a company and first of all, as fans of pro audio devices, we do our best in our daily work to
satisfy your most sophisticated sound expectations. We put in your hands the highest quality
product, precisely designed and hand manufactured by our qualified staff, without any
compromise. To build our devices we use only the best, hand-selected electronic
components, we take care about all parameters repeatability and high quality of all our
products.
Please take a little time to read this manual thoroughly, as it will help You to entirely
understand how the
Sculptor
works and what is important to use it safely.
Gem Audio Labs team.
FOR SAFE OPERATION
INSTALLATION
Before You connect the power cord to the device please check fuses value and make
sure that the voltage switch setting reflects the correct local power line voltage. For
line voltages from 100V to 120V, set the switch to 115V and use 1,25A fuses (slo-blo;
5x20mm). The 230V position is good for all line voltages from 200-240Volts; fuses:
630mA (slo-blo; 5x20mm).
This unit is equipped with a three-pronged AC power cord. To reduce the risk of
electrical shock never remove or otherwise attempt to defeat the ground pin of the
power cord.
Do not allow water to enter this unit or allow the unit to become wet. Fire or electrical
shock may result.
Do not place a container with liquid or small metal objects on top of this unit. Liquid
or metal objects inside this unit are a fire and electrical shock hazard.
Do not place heavy objects, including this unit, on top of the power cord. A damaged
power cord is a fire and electrical shock hazard.
